Foxtech Argus V3, User Manual

Page: 10 / 23

If it is found that the indicator light of the camera is not flashing, that is, the indicator
light corresponding to the camera is working abnormally and data cannot be
recorded.
After connecting the power supply, please disconnect the power supply
before the Argus V3 starts and completes the self-test. If the power is cut off
during the start-up process, the camera can not record data after starting
again.
Indicator light
The power indicator is always on after the power supply is connected, and off after
the power supply is disconnected.
The camera indicator is used to indicate the status of Argus V3 cameras, and
the power indicator is used to show whether the power supply is normal.
Indicates that the LED is off It indicates that the LED lamp flashes
regularly during the indication process
Indicates that the LED is always on during the indication Process
Camera LED Power LED Status
Power not plugged in
Power plugged in
Camera on
Camera records data
Trigger control
T he DJI psdk UAV is installed through the SKYPORT adapter ring, and can be directly
controlled by the DJI standard ground station software.
Argus V3 signal aviation socket provides two modes of control, level signal and PWM
signal. Aviation plug lead is connected to flight control shooting signal socket, which
can be controlled by flight control ground station software.
The trigger mode of signal is modified by MS CCS Pro software.