Page | 27
7. Select the position in the right column where you would like to add the
sound. If you want to overwrite the sound in that position, then click on
the overwrite box, located between the two columns. This will replace
the current sound in that position.
NOTE:
The sound that was located in that position will be deleted. If you
choose to insert the sound in that position and move all other sounds down
one, click the insert button. This will add the sound in that position and not
overwrite the current sound. If you would like to remove sounds from the
right side column before adding new ones, simply highlight the sound, and
click on the “Remove From List” button, located between the two columns.
If you would like to relocate a sound in the right sound column, you can
highlight the sound and then type the position number that you would like to
move it to in the “Move To” box (located below the right side column). This will
move the sound to your designated number. You can also highlight the sound
that you wish to move on the right column, and then click on the up or down
arrows below the right side column to move the sound one position at a time. If
you would like to reset your list at any time, click on the Clear/Reset List button
located on the right side of the screen. This will reset the list to its initial sounds.
8. Click on the “Copy to Caller” button located on the right side of the
screen. Your sounds will now be programmed to your SNOW-CROW
PRO 2.
IMPORTANT NOTE:
Your SNOW-CROW PRO 2 will play .FXP, .24b .mp3
and .wav files. Other file types are not supported. Although you may store
.FXP and .24b sounds on your computer for later use, they can not be played
on your computer, or on any audio player other than a FOXPRO
®
caller.
7.4 DOWNLOADING NEW PLAYLIST TO TX-500
Program your sounds into the SNOW-CROW PRO 2 as outlined in the
instruction manual. Make certain that you do not use the same number for more
than one sound! Note that the transmitter can only display 21 characters per
line. The first 3 characters must be the sound number, from “000” through
“499”. Place a space between the sound number and the sound name. 17
characters remain for the sound name. Although the sound name can have
more characters, the TX-500 will only display the first 17 characters. Any
additional ones will not be displayed.
1. Disconnect all accessories from the SNOW-CROW PRO 2 (i.e.
charger, speakers, etc.)
2. Turn the power off on both the SNOW-CROW PRO 2 and the TX-500.
3. Turn on the TX-500 and SNOW-CROW PRO 2.
4. Access the Main Menu
5. Enter the TX500 CONFIG menu