6
Number
Description
1
LCD panel
2
Send/Power
3
Sound Up/Down
4
Auxiliary
5
Lanyard Loop
6
Volume Up/Down
7
Mute
1-5
TX35 Remote:
Requirements
The TX35 remote control operates
on a single 9V DC battery. It is
recommended that you use a high
quality alkaline battery.
Installing the 9VDC Battery in
the TX35 Remote
1.
Access the battery
compartment by removing the
door from the back of the remote. The door slides down and off of the remote.
2.
Attach the 9VDC battery to the power wire in the back of the remote. The battery
only connects one way. Make sure that the terminals from the battery wire are
properly connected to the terminals on the battery.
3.
Slide the battery compartment door back on the remote.
2.
Operating Instructions
This section covers all sound playback and general operation instructions of the Cabela’s
Outfitter Series electronic game call and TX35 remote control.
2-1
Playing Sounds
Before using the Cabela’s Outfitter Series electronic game call and TX35 remote control, make
sure that both devices have good batteries installed.
1.
Turn on the game call by turning the power switch clockwise to the ‘on’ position. The
green LED will illuminate indicating the power is turned on.
2.
Verify that at least one of the speaker selector switches is in the ‘on’ position.
Summary of Contents for Cabela's Outfitter Series
Page 1: ......
