Thermal Jet
Appendix K: Bulk Ink Supply
5780-329 Operations Manual Rev J
Page 62
2. Make ink line connections from the bulk ink supply to the regulator per the diagram
below; the trunk line should be made as short as practical. (CAUTION: Do not con-
nect septum fitting to the print cartridge at this time.)
3. Make all electrical connections as shown, including all power connections per the
diagram below.
Ink service port
(1 900-757)
Fitting, tee, reducer, 1/8" to 3/32"
(5361-349)
Tubing, 3 /32 ID x 5/32 OD
(1303-56 4)
Bulk Ink Supp ly
Trunk line
Tubing, 1/8" ID x 1/4 " OD
(1301 -468)
Bulk Ink Print he ad 2
Regulator (5780-105)
Tubing, 1/8" ID x 3/16" O D (1303 -563)
Fi tting assembly, septum to
1/8" barb (5780- 393)
B ulk Ink Print head 1
B ulk Ink cartridge
TUBING DIAGRAM
3' Maximum vertical
rise from bulk ink
supply to print head
Orient as shown
10' Maximum horizontal separation between B ulk Ink Supply and furtherst Print Hea d
Valve, QD to 1/8" barb
(1900-75 7)
BULK INK SUPPLY
POWER SUPPLY
15V (P/N: 5760-930)
POWER SUPPLY
15V (P/N: 5760-930)
POWER SUPPLY
15V (P/N: 5760-930)
BEACON
(P/N: 5780-214)
ENCODER
(P/N: 5760-820-IJ)
CABLE, SERIAL
(P/N: 5780-319-10)
CABLE, SERIAL
(P/N: 5780-319-10)
CABLE, SERIAL, F/F
(P/N: 5780-616-06)
PRINT HEAD 2
PRINT HEAD 1
PHOTOCELL
(P/N: 5760-383)
ACCESSORY
HUB
POWER SUPPLY
15V (P/N: 5760-930)
MARKSMAN HHI
