Hardware Installation
18
2.3.5
M9000-2S+ extended module Installation
S95xx series provide 10Gb slots. The procedure for installing the M9000-2S+ module and
the SFP+ 10Gb fiber transceiver is shown below:
Step 1: Put on an ESD wrist strap (or antistatic gloves).
Step 2: Insert the M9000-2S+ module to the guide rail inside the 10Gb module slot.
Step 3: Push the M9000-2S+ module along the guide rail gently until it comes into contact with
the machine panel.
Step 4: Insert the SFP+ transceiver to the guide rail inside the M9000-2S+. Do not put the XFP
transceiver up-side-down.
Step 5: Push the SFP+ transceiver along the guide rail gently until it comes into contact with the
M9000-2S+.
Note: the 2SFP+ extended module does not support hot swappable. M9000-2S+ extended
module can insert SFP+ fiber transceiver.
2.3.6
M9000-2S Extended module Installation
S95xx series provide 10Gb slots. The procedure for installing the M9000-2S module and
the SFP 1Gb fiber transceiver is shown below:
Step 1: Put on an ESD wrist strap (or antistatic gloves).
Step 2: Insert the M9000-2S module to the guide rail inside the 10Gb module slot.
Step 3: Push the M9000-2S module along the guide rail gently until it comes into contact with the
machine panel.
Step 4: Insert the SFP transceiver to the guide rail inside the M9000-2S. Do not put the SFP
transceiver up-side-down.
Step 5: Push the SFP transceiver along the guide rail gently until it comes into contact with the
M9000-2S.
Note: the 2GB extended module does not support hot swappable.
Caution!
Do not stare directly at the 2 fiber bores in the fiber transceiver when the switch is in operation,
otherwise the laser may hurt your eyes.
2.3.7
Copper Cable/Fiber Cable Connection
Copper cables should be connected as below: