7
Pin configuration is as follows:
- RS485-1
- RS485-2
Earth Terminal
This terminal is used to connect the battery to the earth for safety purposes.
Handle
The handle is used to push or pull the battery from its compartment. DO NOT LIFT THE BATTERY
USING THIS HANDLE.
Power Terminal
A set of positive and negative terminals to connect the battery to the inverter. When you are unplugging
the wires from the terminals, make sure you press the lock button and then pull it. When installing the
plug, do not press the button and push the plug until you hear a click sound.
In addition to the above physical features, the battery has the following performance:
1.
90% Depth of Discharge
2.
Cycle life >6000 cycles
BMS BOX Features:
- interface
BAT IN +
Positive electrode of battery.
Pin
Function Definitions
1
GND
Power/signal ground
2
GND
Power/signal ground
3
B2
RS485-B
4
A2
RS485-A
5
VCC_485_2
Wake up the power
5v
6
P+
Signal P+
7
N-
Signal N-
8
VCC_485
power 5v
Pin
Function Definitions
1
GND
Power/signal ground
2
GND
Power/signal ground
3
B2
RS485-B
4
A2
RS485-A
5
VCC_485_2
Wake up the power
5v
6
P+
Signal P+
7
N-
Signal N-
8
VCC_485_NEXT
power 5v
