2
8
2-1 Install the CPU and CPU Cooler
Install the CPU
Locate the alignment keys on the mother�oard CPU socket and the notches on the CPU.
Read the following guidelines �efore you �egin to install the CPU :
Make sure that the motherboard supports the CPU.
Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.
(Or you may locate the notches on �oth sides of the CPU and alignment keys on the
CPU socket.)
Apply an even and thin layer of thermal grease on the surface of the CPU.
Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
Set the CPU host frequency in accordance with the CPU speciications. It is not
recommended that the system bus frequency be set beyond hardware speciications
since it does not meet the standard requirements for the peripherals. If you wish to
set the frequency beyond the standard speciications, please do so according to your
hardware speciications including the CPU, graphics card, memory, hard drive, etc.
Hyper-Threading Technology System Requirements:
(Go to Intel's we�site for more information a�out the Hyper-Threading Technology)
An Intel
® CPU that supports HT Technology
A chipset that supports HT Technology
An operating system that is optimized for HT Technology
A BIOS that supports HT Technology and has it enabled
C
AU
T
IO
N
!
LGA1155 CPU Socket
Alignment Key
Pin-1 corner of
the CPU Socket
LGA1155 CPU
Notch
Pin-1 triangle
marking of CPU