Chapter 3 BIOS Description
35
v
Soft-Off by PWR-BTTN
This option is used to set the power down method.This function is only valid
for systems using an ATX power supply.
v
Case Open Warning
This option is used to enable or disable case open warning function.
v
Wake- up by PCI card
This item is used to set the system to wake up by PCI card.
v
Power On by Ring
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software.
v
USB KB Wake-Up From S3
This item is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode.
v
Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month) Alarm
W hen the Resume by Alarm set as
“
Enabled
”
, this item will be modified. It is
used to set the timing for the start-up date.
v
Time (hh:mm:ss) Alarm
W hen the Resume by Alarm set as
“
Enabled
”
, this item will be modified. It is
used to set the timing for the start-up time.
v
FDD,COM,LPT Port
W hen this item is enable,the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive,serial ports,or
the parallel port.
v
PCI PIRQ[A-D]#
W hen this item is disabled,any PCI device set as the Master will not power on
the system.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Summary of Contents for P9657AB User's
Page 8: ......
