Foxconn P9657AB User's Manual Download

Page: 24 / 71

Chapter 2 Installation Instructions

Expansion Slots

This motherboard includes three 32-bit master PCI slots,one PCI Expressx 1

slot, two PCI Express x 16 slots.

PCI Slots

The expansion cards can be installed in the three PCI slots. PCI slots support

cards such as a LAN card, USB card, SCSI card and other cards that comply

with PCI specifications.

PCI Express x1 Slots

This motherboard has one PCI Express x1 slot that designed to accommodate

less bandwidth-intensive cards, such as a modem or LAN card.

PCI Express x16 Slots

This motherboard has two PCI Express x16 slots that reserved for graphics or

video cards. The difference in bandwidth between the x16 and x1 slots is no-

table to be sure, with the x16 slot pushing 4GB/sec (8GB/sec concurrent) of

bandwidth, the PCI Express x1 slot offering 250MB/sec.

Installing an expansion card:

1.Before installing the expansion card, read carefully the documentation that

came with it and make the necessary hardware settings for the card.

2.Make sure to unplug the power cord before adding or removing any expan-

-sion cards.

3.Remove the bracket opposite the slot that you intend to use.

4.Align the card connector with the slot and press firmly until the card is

comlpeletly seated in the slot.

5.Secure the card to the chassis with the screw you removed earlier.

For the detailed PCI Express cards support list on this motherboard ,please

visit the website:

http//www.foxconnchannel.com

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Summary of Contents for P9657AB User's








































































Search results

Summary of Contents for P9657AB User's

Reviews:

Related manuals for P9657AB User's

Brands by name

Popular brands

Foxconn P9657AB User's, Manual

Search results

Summary of Contents for P9657AB User's

Reviews:

Related manuals for P9657AB User's

Brands by name

Popular brands