Foxconn P4M8907SA User Manual Download Page 51

Page: 51 / 73

Chapter 3 BIOS Description

IRQ10 (Reserved)

This option is used to enable or disable IRQ10 (Reserved) activity monitoring.
The setting values are: Disabled and Enabled.

IRQ11 (Reserved)

This option is used to enable or disable IRQ11 (Reserved) activity monitoring.
The setting values are: Disabled and Enabled.

IRQ12 (PS/2 Mouse)

This option is used to enable or disable IRQ12 (PS/2 Mouse) activity monitoring.
The setting values are: Disabled and Enabled.

IRQ13 (Coprocessor)

This option is used to enable or disable IRQ13 (Coprocessor) activity
monitoring.

The setting values are: Disabled and Enabled.

IRQ14 (Hard Disk)

This option is used to enable or disable IRQ14 (Hard Disk) activity monitoring.
The setting values are: Disabled and Enabled.

IRQ15 (Reserved)

This option is used to enable or disable IRQ15 (Reserved) activity monitoring.
The setting values are: Disabled and Enabled.

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for P4M8907SA










































































Search results

Summary of Contents for P4M8907SA

Reviews:

Related manuals for P4M8907SA

Brands by name

Popular brands

Foxconn P4M8907SA, User Manual

Search results

Summary of Contents for P4M8907SA

Reviews:

Related manuals for P4M8907SA

Brands by name

Popular brands