Foxconn P4M8907SA User Manual Download Page 41

Page: 41 / 73

Chapter 3 BIOS Description

AGP Aperture Size

This option defines the size of the aperture if you use an AGP graphics adapter.

The aperture is a portion of the PCI memory address range dedicated for

graphic memory address space.

Note: This function does not work when onboard VGA is used.

AGP 3.0 Mode

This option is used to set an appropriate mode for the installed AGP3.0 card.

AGP Master 1 WS Write

W hen

“

Enabled

”

, writes to the AGP (Accelerated Graphics Port) are executed

with one wait states. The setting values are: Disabled and Enabled.

AGP Master 1 WS Read

W hen

“

Enabled

”

, reads to the AGP (Accelerated Graphics Port) are executed

with one wait states. The setting values are: Disabled and Enabled.

VGA Share Memory Size

This option is used to set the onboard VGA share memory size. If you are

running under Windows XP or Windows 2000, set this option to 32M or lower.

The setting values are: Disabled, 16M, 32M, 64M.

Direct Frame Buffer

This option is used to enable or disable direct frame buffer.

AGP & P2P Bridge Control Menu

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for P4M8907SA










































































Search results

Summary of Contents for P4M8907SA

Reviews:

Related manuals for P4M8907SA

Brands by name

Popular brands

Foxconn P4M8907SA, User Manual

Search results

Summary of Contents for P4M8907SA

Reviews:

Related manuals for P4M8907SA

Brands by name

Popular brands