Foxconn M61PMP Series User Manual Download Page 37

Page: 37 / 106

[Disabled] : Disable SATA controller 1 and 2, SATA devices are unusable.
[Device 0] : Enable SATA controller 1, SATA port 1 and SATA port 2 are usable.
[Device 0/1] : Enable SATA controller 1 and 2, SATA port1/2/3/4 are usable.

► nVIDIA RAID Setup

This item is used to enbale/disable RAID mode for each ATA channels while entering setup.

USB Configuration

USB Configuration

Help Item

Module Version - 2.24.5-13.4

Enable support for

legacy USB.

USB Devices Enabled : Auto option disables

None

legacy support if no

USB devices are

commected.

Legacy USB Support

USB 2.0 Controller Mode

[High Speed]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Enabled]

► Module Version

This item shows the module version of USB.

► USB Devices Enabled

This item is used to enable or disabled the enhanced host controller interface for USB.

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.

► USB 2.0 Controller Mode

This item is used to set the transmission rate mode of USB 2.0. This function only works under

DOS mode. The available settings are: [High Speed] in 480Mbps; [Full Speed] in 12Mbps.

If USB devices are connected to the computer, the following item will appear:

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There

are many different emulation types of this USB device, such as floppy, hard disk and CDROM

can be selected.

Summary of Contents for M61PMP Series











































































































Search results

Summary of Contents for M61PMP Series

Reviews:

Related manuals for M61PMP Series

Brands by name

Popular brands

Foxconn M61PMP Series, User Manual

Search results

Summary of Contents for M61PMP Series

Reviews:

Related manuals for M61PMP Series

Brands by name

Popular brands