RAID User’s Guide
19
7. After the RAID set size is set, the message “Are You Sure (Y/N)?” will display
before completing the configuration. Answer “N” to abort the creation of the new
RAID set, or “Y” to proceed with the RAID set creation.
8. RAID sets can be created in both BIOS and in the SATARaid5 GUI. If you have
excess capacity left on your hard drives after creating a RAID set in the BIOS, you
can later go to the SATARaid5 GUI to create additional logical drives that fully utilize
the capacity on all your hard drives.
4. If manual configuration is selected, the chunk size of Striped Sets can be selected.
For Mirrored Sets, the Source and Target drives can be selected.
5. If auto configuration is selected, BIOS will select RAID member drives automati-
cally and the chunk size of Striped Sets is set to 64KB.
6. Select RAID set size with
and
keys.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５
2005-1-21, 10:29
19
