Installation Precautions
Website:
http://www.foxconnchannel.com
Support Website:
http://www.foxconnsupport.com
Worldwide online contact Support:
http://www.foxconnsupport.com/inquiry.aspx
CPU Support List:
http://www.foxconnsupport.com/cpusupportlist.aspx
Memory, VGA Compatibility List:
http://www.foxconnsupport.com/complist.aspx
Technical Support
■ Electrostatic discharge (ESD) is the sudden and momentary electric current
that flows between two objects at different electrical potentials. Normally it comes
out as a spark which will quickly damage your electronic equipment. Please wear
an electrostatic discharge (ESD) wrist strap when handling components such as a
motherboard, CPU or memory.
■ Ensure that the DC power supply is turned off before installing or removing CPU,
memory, expansion cards or other peripherals. It is recommended to unplug the
AC power cord from the power supply outlet. Failure to unplug the power supply
cord may result in serious damage to your system.
CA
UT
IO
N
Please carefully read the following procedures to install your computer :
■ It is suggested to select high-quality, certified fans in order to avoid damage to
the motherboard and CPU due to high temperature. Never turn on the computer
if the CPU fan is not properly installed.
■ We cannot guarantee that your system can operate normally when your CPU
is overclocked. Normal operation depends on the overclocking capacity of your
device.
■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or
S/PDIF cables to the internal connectors on the motherboard, make sure their
pinouts are matching with the connectors on the motherboard. Incorrect
connections might damage the motherboard.
■ When handling the motherboard, avoid touching any metal leads or connectors.
■ If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
■ Before turning on the power, please make sure the power supply AC input
voltage setting has been configured to the local standard.
■ To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■ If you are uncertain about any installation steps or have a problem related to the
use of the product, please consult a certified computer technician.
