5
86
4. After exiting from "
RAID Level
", it goes directly to "
Stripe Size
" item. Because all
four disks are selected for RAID10, so there is no need to go to
Disks
option.
5. Use Up or Down arrow key to select the desired strip size when entering “
Strip
Size
” menu. The default value is 64K.
6. In “
Capacity
” item, use the default value, and press <Enter>. The default value is
twice the smallest hard disk size, that is, 74.5GB * 2 = 149GB.
7. Select “
Create Volume
” and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
The following are typical values:
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID10
RAID10(RAID0+1)
Select Disks
128K
149.1 GB
N/A
Create Volume
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[
HELP
]
64KB
[
CREATE VOLUME MENU
]
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Recover Volume Options
5. Exit
RAID Volume :
ID
Name
Level Stripe
Size Status Bootable
0
TryRAID10
RAID10(0+1) 64KB 149.1GB
Normal
Yes
Physical Disks:
Port Drive Model
Serial #
Size Type/Status(Vol ID)
0
Hitachi HDS72161
PVF904Z21G2JZM
149.0GB
Member Disk(0)
1
ST380811AS
5PS1TAGW
74.5GB
Member Disk(0)
2
SAMSUNG HD161HJ
S0V3J9APA30524
149.0GB
Member Disk(0)
3
ST380815AS
5RW1CA37
74.5GB
Member Disk(0)
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[
DISK/VOLUME INFORMATION
]
[
MAIN MENU
]
1. Create RAID Volume
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu