Foxconn H55M Series User Manual Download Page 32

Page: 32 / 73

Advanced BIOS Features

► Quick Boot

While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.

► Quiet Boot

This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.

► Bootup Num-Lock

This item defines if the keyboard Num Lock key is active when your system is started. The

available settings are: On (default) and Off.

► PCI Latency Timer

This item is used to set the value in units of PCI clocks for PCI device latency timer register.

► Intel VT-d Configuration/Trusted Computing

Press <Enter> to go to relative submenu.

Advanced BIOS Features

Quick Boot Help Item

Quiet Boot

[Enabled]

Bootup Num-Lock

[On]

PCI Latency Timer

[64]

► Intel VT-d Configuration

[Press Enter]

► Trusted Computing

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Enabled]

Allows BIOS to skip

certain tests while

booting. This will

decrease the time

needed to boot the

system.

Summary of Contents for H55M Series










































































Search results

Summary of Contents for H55M Series

Reviews:

Related manuals for H55M Series

Brands by name

Popular brands

Foxconn H55M Series, User Manual

Search results

Summary of Contents for H55M Series

Reviews:

Related manuals for H55M Series

Brands by name

Popular brands