Foxconn Flat Panel Monitor User Manual Download

Page: 49 / 84

Chapter 3 BIOS Description

8. Fox Central Control Unit

Fox Central Control Unit menu

8.1 CPU Configuration

Scroll to this item and press <Enter> to view the following screen:

CPU Configuration Menu

Super Clock Free

Enables or disables CPU clock free. It is available only when the CPU is not
the XE CPU and EIST is enabled.

Intel(R) SpeedStep(tm) tech

Whether to enable the Intel speedstep technology.

CPU Ratio Setting

This item is used to set CPU ratio.

C1E Support

This item is used to enable or disable C1E (Enhanced Halt State) function.

Note:

This function will not be displayed until a CPU supports C1E function.

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for Flat Panel Monitor





















































































Search results

Summary of Contents for Flat Panel Monitor

Reviews:

Related manuals for Flat Panel Monitor

Brands by name

Popular brands

Foxconn Flat Panel Monitor, User Manual

Search results

Summary of Contents for Flat Panel Monitor

Reviews:

Related manuals for Flat Panel Monitor

Brands by name

Popular brands