Foxconn ELA User Manual Download Page 32 | Manualshive

Page: 32 / 117

background image

3

25

Advanced BIOS Features

► Boot Device Priority

This option is used to select the priority for boot devices. After pressing <Enter>, you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing <Esc>.

► Hard Disk Drives

This option is used to specify the boot priority sequence from available hard disk drives.

► Removable Drives

This option is used to specify the boot priority sequence from available removable drives.

► CD/DVD Drives

This option is used to specify the boot priority sequence from available CD/DVD drives.

► Quick Boot

While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.

► Quiet Boot

This item is used to enable/disable the quiet boot.

[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.

► Floppy Drive Seek

This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.

► Bootup Num-Lock

This item defines if the keyboard Num Lock key is active when your system is started. The

available settings are: On (default) and Off.

► BIOS Write Protect

To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism
provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g.
CIH.

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

Advanced BIOS Features

► Boot Device Priority

[Press Enter]

Help Item

► Hard Disk Drives

[Press Enter]

► Removable Drives

[Press Enter]

Specifies the

► CD/DVD Drives

[Press Enter]

Boot Device

Quick Boot

[Enabled]

Priority sequence.

Quiet Boot

[Enabled]

Floppy Drive Seek

[Disabled]

Bootup Num-Lock

[On]

BIOS Write Protect

[Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Press Enter]

«
...
30
31
32
33
34
...
»

Summary of Contents for ELA






















































































































Reviews:

No comments

Related manuals for ELA

Brand: QDI Pages: 22

Brand: AOpen Pages: 8

Brand: Linear Pages: 10

Brand: P&E Microcomputer Systems Pages: 38

Brand: Atmel Pages: 16

Brand: Microchip Technology Pages: 52

126791-HMC764LP6C

Brand: Analog Devices Pages: 18

Brand: IWILL Pages: 54

Brand: Microchip Technology Pages: 30

Brand: C&T Solution Pages: 90

Brand: TRIGEM Pages: 17

Brand: DFI Pages: 80

Brand: DFI Pages: 75

Brand: Abit Pages: 44

nForce2 Ultra 400

Brand: Nvidia Pages: 78

NuMicro NuMaker-M256SD

Brand: Nuvoton Pages: 52

SBC86832 Series

Brand: AXIOMTEK Pages: 65

Brand: AXIOMTEK Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands