Chapter 6 Appendix
92
2. Press
Y
if you want to wipe out all the data from the RAID array, otherwise press
N
. You must choose
Yes
if the drives were previously used as RAID drives.
The
Array List
window appears, where you can review the RAID arrays that you
have set up.
3. Use the arrow keys to select the array that you want to set up, then press
Enter.
The
Array Detail
window appears.
4. If you want to mark this disk as empty and wipe out all its contents then press
C
.
5. At the prompt, press
Y
to wipe out all the data, otherwise press
N
.
6. Press
Enter
again to go back to the previous window and then press
F10
to exit
the RAID setup.
文件使用
"pdfFactory"
试用版本创建
www.fineprint.com.cn