Chapter 5 Directions for Bundled Software
68
1. Click Next to go to the following screen:
Figure 2. MediaShield Select-Configuration Screen
Note: You will only see this screen if you have less than 4 free disks in the
system. If there are 4 or more free disks available, you will proceed to directly
to custom setup.
Selecting the
“
Protection
”
option will automatically configure the best RAID
option based on the number of drives and with the criteria that if a drive fails
you will not lose your data.
Selecting the
“
Capacity
”
option will automatically configure the best RAID
option based on the number of drives and the desire for maximum capacity.
This array will NOT be fault-tolerant, so choose this option only if your data is
non-critical or is being backed up.
Select the
“
Custom
”
option to create a custom RAID array that can be a:
v
Striped Array
v
Mirrored Array
v
Stripe Mirrored Array
v
Spanning Array
v
RAID 5 Array
To set up a Striped Array, select
“
Striping
”
as RAID Mode and leave
“
Stripe
Size
”
with its default value, as shown in Figure 3.
文件使用
"pdfFactory"
试用版本创建
www.fineprint.com.cn
