3
27
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On System Test (POST). The LED is located at the front panel, and it displays POST
state by different long-short blinking intervals. You can always leave this state enabled.
Please refer to the following table.
► Smart Boot Menu
This item is used to enable or disable the smart boot menu. select [F11] will provide a timer
to let user to control boot device easily.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB/HTT Speed
This item displays the current Front Side Bus speed.
► Current CPU Multiplier
This item displays the current CPU Ratio.
► Current Memory Speed
This item displays the current memory speed.
Fox Intelligent Stepping
► CPU/HT Reference Clock (MHz)
This option is used to adjust the CPU clock.
► PCIE Reference Clock (MHz)
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Fox Intelligent Stepping
CPU/HT Reference Clock (MHz) [200]
Help Item
PCIE Reference Clock (MHz)
[100]
SB Reference Clock (MHz)
[100]
Processor Frequency (FID)
[Auto]
Spread Spectrum
[Disabled]
► AM2+ CPU Ratio Adjust
[Press Enter]
CPU-NB HT Link Speed
[Auto]
NCHT Incoming Link Width
[Auto]
NCHT Outgoing Link Width
[Auto]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
200
System Status
Power LED Status
Stop Blinking Condition
Normal
Always On
Always On
No Memory
Continue blinking On (1sec.), Off (1sec.)
Reboot & Memory OK
No Display
Continue blinking On (2sec.), Off (2sec.)
Reboot & Display OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip
No CPU Fan
Continue blinking On (1/2sec.), Off (1/2sec.)
Reboot & Fan OK
