Foxconn A79A Series User Manual Download Page 113

Page: 113 / 115

106

Appendix

106

Appendix - Crossfire

Technology

Introduction

CrossFire

technology is a newly introduced product from ATI Technologies. It is de-

signed to dramatically improve the graphics performance for applications which is used

by players and other high-end users.

The CrossFire

aspect requires the following components to be available in order to

appear as an option within Catalyst

Control Center :

■

CrossFire

Ready motherboard, such as Foxconn’s A79A-S.

■

CrossFire

Edition graphics card that works as the master graphics card.

■

CrossFire

Ready graphics card from the same brand-family that works as the

slave graphics card.

For the detailed CrossFire Graphic Card support list on this motherboard, please visit

the website: http://www.foxconnchannel.com

Using CrossFire

Technology

1. Please uninstall any existing graphics card drivers which would possibly create a

conflict before attempting to install this display card.

2. Install the Radeon CrossFire

Edition graphics card (master) to PCI-E1_X16 slot.

3. Install the Radeon CrossFire

Ready graphics card (slave) to PCI-E2_X16 slot.

CrossFire

Edition graphics
card(Master)

CrossFire

Ready graphics
card(slave)

Summary of Contents for A79A Series




















































































































Search results

Summary of Contents for A79A Series

Reviews:

Related manuals for A79A Series

Brands by name

Popular brands

Foxconn A79A Series, User Manual

Search results

Summary of Contents for A79A Series

Reviews:

Related manuals for A79A Series

Brands by name

Popular brands