3
26
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function.
► Current CPU Speed
This item displays the current CPU speed.
► Current DRAM Clock
This item displays the current DRAM clock, in dual DRAM controller
Fox Intelligent Stepping
► CPU Clock
This option is used to adjust the CPU clock.
► PCI Express Clock
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
► CPU Multiplier Adjust (Optional only if CPU supports)
This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be displayed
only if your CPU is supporting this feature.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Fox Intelligent Stepping
CPU Clock
[200]
Help Item
PCI Express Clock
[100]
CPU Multiplier Adjust
[Auto]
Spread Spectrum
[Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[200]
System Status
Power LED Status
Normal
On
No CPU Fan
Blinking once (blinking 0.5 sec., off 0.5 sec.)
No Display
Blinking once (blinking 2 sec., off 2 sec.)
No Memory
Blinking twice
Post Error Message
Blinking thrice
