Chapter 3 BIOS Description
29
v
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started. The available setting values are: On and Off.
v
Gate A20 Option
This option is used to set up the A20 signal control necessary for system is
started.
v
Security Option
W hen it is set to
“
Setup
”
, a password is required to enter the CMOS Setup
screen; W hen it is set to
“
System
”
, a password is required not only to enter
CMOS Setup, but also to start up your PC.
v
APIC Mode
This option is used to enable or disable APIC function.
v
MPS Version Control For OS
This option is used to set up the version of MPS Table used in OS.
v
OS Select For DRAM > 64MB
This option is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system.Otherwise,leave this item at
the default.
v
Delay For HDD(secs)
This option is used to set the delay time of selecting the HDD controller.
v
Full Screen LOGO Show
This option allows you to enable or disable the full screen logo. The available
setting values are: Disabled and Enabled.
v
Small Logo (EPA) Show
This item allows you to enable or disable the EPA logo.
v
Boot Other Device
W ith this function set to enable, the system will boot from some other de-
vices if the first/second/third boot devices failed.
文件使用
"pdfFactory"
试用版本创建
www.fineprint.com.cn
