manualshive.com logo in svg

Foxconn 755FXK8AA series, User Manual, Page: 40 / 87

Share
Download
Foxconn 755FXK8AA series User Manual Download Page 40

32

Chapter 3   BIOS Description

Advanced Chipset Features

DRAM Configuration (Default: Press Enter)

Press <Enter> to set the items about DRAM Configuration. Please refer to
page 33.

HyperTransport Control

Press <Enter> to set the items about HyperTransport. Please refer to page
33.

AGP Aperture Size (Default: 64MB)

This option defines the size of the aperture if you use an AGP graphic adapter.
The aperture is a portion of the PCI memory address range dedicated for

graphic memory address space.

AGP Fast Write Support (Default: Disabled)

Use this option to enable or disable AGP fast write support.

AGP Data Transfer Rate (Default: Auto)

Use this option to set AGP data rate.

System BIOS Cacheable (Default: Disabled)

   Select “Enabled” to allow catching of the system BIOS which may improve per-

formance. If any other program writes to this memory area, a system error
may result. The available setting values are: Disabled and Enabled.

Advanced Chipset Features Menu

Ｋ８Ｓ７５５ＦＸＡ－ｍａｎｕａｌ－Ｖ１．１．ｐ６５

2005-2-3, 14:33

32

Summary of Contents for 755FXK8AA series
























































































Reviews:

No comments