ASSEMBLING THE DUST COLLECTOR
Stand the base (A) and adjust the castor holes to align with the base
holes, then tighten the nuts and screws by means of screwdriver and
wrench. Fig. 1.
Align the filtration housing inlet (C) with the electric power collector
outlet (B), insert the packing (E) between them then tighten them
together with six bolts. Fig. 2.
Mount two support rods (I) and blocks (J) on the electric power
collector using bolts. Fig. 3.
Mount another two support rods with block and handle (K) on the
filtration housing using bolts. Fig. 4.
