32
TRANSPORT HANDLE
To transport the tool, you must block the head down through the locking pin 10, then use the
handle illustrated in the picture to lift it and move it.
After correctly blocking the piece to be cut in the vice,
start the machine and let the motor run at its maximum
speed. Slowly lower the disc (
A
), until it comes into
contact with the piece to be cut (
B
). Exert a constant
pressure on the disc to avoid any skipping that could
make the disc oval and thus compromise cutting quality
and also break the disc.
The result is better when the workpiece is placed in
order that the disc cuts with a minimum contact arc.
Keep on exerting a constant pressure during cutting.
FUNCTIONING
