FOX RACING SHOX FLOAT X EVOL, Owner'S Manual

Page: 19 / 32

P/n: 605-00-060, rev . d |
2006 FLOAT x EVOL OwnEr’s mAnuAL
sTEp While still seated on Atv, have a friend measure the vertical distance from the ground plane
to the chassis, under the footpegs (rear frame height) and the distance from the ground
plane to the chassis at the front engine mount (front frame height) . if your vehicle has a
skid plate, measure to the bottom of that .
mEAsurinG ThE FrOnT FrAmE hEiGhT
jusT undEr ThE FrOnT mOTOr mOunT
mEAsurinG ThE rEAr FrAmE hEiGhT
jusT in FrOnT OF ThE FOOT pEG
sTEp 8
the rear frame height should be between 7”-8” for moto-X use, 8”-9” for cross-country
use . the front frame height should be approximately 1/4”-1/2” higher than the rear .
if your Atv is sitting too low in the front, increase the mAin air chamber pressure in the floAt X evol
using the pump and repeat all the steps above until you reach the desired sag setting .