background image

OPERATION MODE

Whenever there is touch contact with the panel when the 
device is not working, the LED ON/OFF turns on.
Whenever there is touch contact with the panel when the 
device is working, the LED light of the operating program stays 
lit up.
For security reasons, to select a different operation mode, the 
corresponding icon must be pressed for 2 seconds to activate 
the operation.
Operation can be stopped at any moment by pressing the LED 
ON/OFF for 2 seconds.

             WARMING AND DRYING TOWELS

Press 2 seconds - continuous operation for 1, 2 or 3 hours.

In this function, the towel warmer switches on and works until 
reaching the operation time of 1, 2 or 3 hours, according to the 
programs I, II or III.
During the selection process, the radiator icon blinks while the 
programmed functions are being detected.
In the program I the radiator works for 1 hour and switches off 
automatically by the end of that period of time. This procedure is 
the same for the program II (2 hours) and III (3 hours).

ROOM TEMPERATURE CONTROL

DUTY-CYCLE ON MODE INDICATOR 

             ON / OFF

Press 2 seconds

The panel switches on when the icon ON/OFF is pressed for 2 seconds.

Press 2 seconds - Activating the temperature control

During the selection process, the ambient icon and the tempe-
ratures' values blink while the programmed functions are being 
detected.
The sensor reads the room temperature according to the 
selected LED, between 18ºC and 24ºC.

              MODE DUTY-CYCLE

Press +5 seconds - Activating the mode Duty-cycle
Function to use for a more customized control equipment 
temperature.
The activation of this mode is shown by the light indicator 
above the icon.

Operation timed at 25%,50%, 75% and 100% per 20 minute 
period.

18º = 25% (5 minutes ON / 15 minutes OFF, ...)
20º = 50% (10 minutes ON / 10 minutes OFF, ...)
22º = 75% (15 minutes ON / 5 minutes OFF, ...)
24º = 100% (continuous operation)

DOMOTIC TOUCH

The Domotic Touch is a simple solution with installation parameters 
of a simple switch.

Economic functionality

Increases energy efficiency by programming the number of hours of 
operation (1, 2 or 3 hours).

Comfort functionality

Allows rationalization of energy expenses by the temperature control
functionality (18ºC, 20ºC, 22ºC, 24ºC).
Thanks to its room temperature sensor this function allows you to 
select the desired temperature for your comfort.

Flexibility

The Domotic Touch allows one or more electric radiators / towel 
warmers to be controlled on the same room, until a maximum power 
of 2000W.

Reviews: