FOUR WINDS INTERNATIONAL
CONTROLS AND OPERATIONS
52
Tips for Safe Usage:
• Discuss proper usage of any elevated bed/electric bed lift system with your children and make
sure they are supervised if playing in the bedroom/sleeping area of the motor home with
elevated beds. Please do not allow horseplay on or under the elevated beds and no items
such as hooks, belts, jump ropes, or towels should hang from any part of the elevated bed.
• Place a night light in the bedroom/sleeping area so users can see at night when getting in and
out of the beds.
• Do not allow children to operate the rear cargo area electric bed lift systems in Toy Haulers.
The lowering and raising of the electric beds should be only conducted by an adult. No
person should be on the electric beds when being lowered or raised.
If you have any questions about elevated beds, Toy Hauler electric bed lift systems, or bed rails please contact
Thor Motorized Services Customer Service Department.
FURNITURE
Do not occupy beds or any other seats that are not equipped with safety seat
belts while the motor home is in motion. Do not use a seat belt on more than
one person.
The sleeping accommodations in this motor home are designed for occupancy
only while the motor home is parked. All occupants in this motor home must
be seated at a designated seating position and must wear seat belts at all
times while this motor home is in motion. Failure to do so may result in serious
injury.
Safety belts and seats can become hot in a vehicle that has been closed up in
sunny weather; they could burn a small child. Check seat covers and buckles
before you place a child anywhere near them.
Jack Knife Sofa
SOFA TO SLEEPER
• Unlatch and remove sofa arms ( if equipped).
• Raise the sofa seat base until the seat base and backrest form a “V” shape by lifting up from
the center of the sofa just below the seat cushions.
• Pull out and push down on the seat base until the seat base is flat.
• Fold the seat belts out of the way.
SLEEPER TO SOFA
• Lift the seat base up until the seat and back rest from a “V” shape.
• Push back and down on the seat base.
• Position the seat belts for use.
• Replace the back rest cushions.
