F8926-GW User Manual
F8926-GW-V1.0.0
the system.
And, if click the
“Add”
button, it will warn you to create a new IPSEC connection.
◆
Add IPSEC connection or edit IPSEC connection
1. Type:
Select mode and functions of IPSEC in this section, now it supports client of
tunnel function, server of tunnel function and transport mode.
2. Connection:
It contains basic address information of tunnel.
Name
- The name used to identify the connection.
Enable
- It will initiate the connection request when reboot or reconnection system;
Local WAN Interface
- Local WAN IP address.
Local Subnet
- The subnet mask of local device, such as 192.168.1.0/24, this option
can be not fill in if in the transport mode.
Local Id
- Local identify. It can be IP address or domain name.
Peer WAN Address
- The IP address of remote device. This option is not available if
the tunnel mode of server is used.
Peer Subnet
– The subnet mask of remote device, such as 192.168.1.0/24, this option
can be not fill in if in the transport mode.
Peer Id
- Remote device identify. It can be IP address or domain name.
3. Detection:
The configuration information for connection detection (DPD).
Enable DPD Detection
: Whether enable this function or not, check it means enable it.
Time Interval:
Set the time interval of DPD.
Timeout:
Set the timeout of DPD.
