F8X26 Series Router
User Manual
3.3.2.2 Wireless Security
Wireless security options used to configure the security of your wireless network. This route is
a total of seven kinds of wireless security mode. Disabled by default, not safe mode is enabled.
Such as changes in Safe Mode, click Apply to take effect immediately.
WEP
：
Is a basic encryption algorithm is less secure than WPA.Use of WEP is discouraged due to
security weaknesses, and one of the WPA modes should be used whenever possible. Only use
WEP if you have clients that can only support WEP (usually older, 802.11b-only clients).
Authentication Type
：
Open or shared key
。
Default Transmit Key
：
Select the key form Key 1 - Key 4 key.
Encryption
：
There are two levels of WEP encryption, 64-bit (40-bit) and 128-bit. To utilize WEP,
select the desired encryption bit, and enter a passphrase or up to four WEP key in hexadecimal
format. If you are using 64-bit (40-bit), then each key must consist of exactly 10 hexadecimal
characters or 5 ASCII charceters. For 128-bit, each key must consist of exactly 26 hexadecimal
characters. Valid hexadecimal characters are "0"-"9" and "A"-"F".
ASCII/HEX:
ASCII, the keys is 5 bit ASCII characters/13bit ASCII characters.
HEX, the keys is 10bit/26 bit hex digits.
Passphrase
：
The letters and numbers used to generate a key.
Key1-Key4
：
Manually fill out or generated according to input the pass phrase.
