F7X34 Series Router
User Manual
Xiamen
Xiamen
Xiamen
Xiamen Four-Faith
Four-Faith
Four-Faith
Four-Faith Communication
Communication
Communication
Communication Technology
Technology
Technology
Technology Co.,Ltd.
Co.,Ltd.
Co.,Ltd.
Co.,Ltd.
Page 24 of 92
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com
Tel
：
+86 592-6300326
6300325
6300324
Fax
：
+86 592-5912735
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
Route:
Route:
Route:
Route:
Detect connection with route method, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
PPP:
PPP:
PPP:
PPP:
Detect connection with PPP method, when choose this method, users should also
configure "Detection Interval" item.
Detection
Detection
Detection
Detection Interval:
Interval:
Interval:
Interval:
time interval between two detections, unit is second
Primary
Primary
Primary
Primary Detection
Detection
Detection
Detection Server
Server
Server
Server IP:
IP:
IP:
IP:
the server used to response the router’s detection packet. This item
is only valid for method "Ping" and "Route".
Backup
Backup
Backup
Backup Detection
Detection
Detection
Detection Server
Server
Server
Server IP:
IP:
IP:
IP:
the server used to response the router’s detection packet. This item
is valid for method "Ping" and "Route".
Note:
Note:
Note:
Note:
When users choose the “Route” or “Ping” method, it’s quite important to make sure
that the “Primary Detection Server IP” and “Backup Detection Server IP” are usable and stable,
because they have to response the detection packet frequently.
Connection
Connection
Connection
Connection Strategy
Strategy
Strategy
Strategy
Connection
Connection
Connection
Connection Strategy:
Strategy:
Strategy:
Strategy:
one way is Connect on Demand, that is the link turnoff automatic under the
situation that the ready link is idle and idle time meets users' configuration requirement, but tit will
connect again if users visit Internet. The other way is to keep alive, that is the link enable to dial
again when reaching the re-dial period users set after disconnection.
Force
Force
Force
Force reconnect:
reconnect:
reconnect:
reconnect:
this option schedules the pppoe or 3G reconnection by killing the pppd daemon
and restart it.
Time:
Time:
Time:
Time:
needed time to reconnect
STP
STP
STP
STP
STP (Spaning Tree Protocol) can be applied to loop network. Through certain algorithm achieves
path redundancy, and loop network cuts to tree-based network without loop in the meantime, thus
to avoid the hyperplasia and infinite circulation of a message in the loop network
Optional
Optional
Optional
Optional Configuration
Configuration
Configuration
Configuration
