Four-Faith Smart Power Technology Co., Ltd.
AT command:
AT+SVRCNT=x
x: Data Service Center number
Note: every AT command is terminated with a enter character.
◆
Main Center Addr+Port:
IP Address and Port of the Main DSC, It’s better to set the port greater than 1024.
AT command of the Main DSC IP address or domain name:
AT+IPAD=xxx
xxx: The IP address or domain name.
AT command of the Main DSC port:
AT+PORT=xxx
xxx: The port value
◆
Backup Center Addr+Port:
IP address and port of the Backup DSC
AT command of the Backup DSC IP address or domain
AT+IPSEC=xxx
xxx: The IP address or domain name
AT command of the Backup DSC port
AT+PTSEC=xxx
xxx: The port value
◆
Multi DSC Configuration
When “Data Center Number” is greater than 1, this setting is valid. For example
,
setting the “Data Center Number” as 3, Main Center, 2nd Center, 3rd Center work as
these three DSC
AT Command of the 2~5 DSC IP address or domain name
AT+IPADn=xxx
n is 1~4 correspond to center 2~5
xxx: The IP address or domain name
AT Command of the 2~5 DSC port
AT+PORTn=xxx
n is 1~4 correspond to port of center 2~5
xxx: The port value
Example:
Set IP address of center 3 as 166.111.8.238, and port 5001, the AT command is as
following: