5
STEP 1 - Basket Assembly
1.
Place folded stroller down on the floor with the footrests facing up.
2.
Fold basket fabric over
Basket Tube
and snap in place.
Repeat step 2 to secure fabric to tube on the other
side.
STEP 2 - Rear Wheel Assembly
1.
With parking brake lever facing down and openings
in
Rear Wheel Assembly Sleeves
up, align and
slide
Rear Wheel Assembly Sleeves
onto leg
tubes
(Fig. 1)
.
2.
After
Rear Wheel Assembly Sleeves
are started
onto the rear leg tubes, move parking brake lever
down into the locked position.
3.
Slide
Rear Wheel Assembly Sleeves
up rear legs
until spring button snaps into holes in
Rear Wheel
Assembly Sleeves
.
Pull out on
Rear Wheel Axle
to be sure
Rear Wheel
Assemblies
are securely snapped to each rear leg.
Rear Wheel
Assembly Sleeves
Fig. 1
Fig. 1
Rear Wheel
Assembly
STEP 3 - Front Wheel Assembly
1.
Position front wheel assembly with large opening
and swivel lock toward front leg sleeve.
2.
Slide
Front Wheel Assembly
onto one of the
front leg sleeves
(Fig. 1)
.
Pull out on
Front Wheel Assembly
to be sure
it is securely snapped to the front leg.
3.
Repeat for other
Front Wheel Assemblies
.
Front Wheel
Assembly
Fig. 1
Front Leg
Sleeve
Large
Opening
Basket Tube
6
1.
Unfold stroller (see Unfolding Stroller section).
2.
Assemble Arm Bar (see Arm Bar Operation section).
STEP 4 - Arm Bar Assembly
STEP 5 - Securing Canopy Sides
1.
Standing at side of stroller, place upper canopy flap
down behind runaway brake bracket and side
of handle
(Fig. 1)
.
2.
Press top and bottom flaps together to secure
hook and loop fabric fastener
(Fig. 2)
.
3.
Place lower flap over top side of handle
(Fig. 3)
.
4.
Press top and bottom flaps together to secure
hook and loop fabric fastener
(Fig. 4)
.
Repeat steps 1 through 4 for opposite side of canopy.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Runaway Brake
Bracket
Side Of
Handle
