A.D.A. Compliance:
306.3 Knee Clearance
307.2 Maximum Protruding Objects
308.2 Forward Reach
308.3 Side Reach
309.4 Operation
902.3 Work Surface
Compliant when properly installed.
ADULT INSTALLATION REQUIRED.
TOOLS REQUIRED:
Level (A)
Measuring tape (B)
Power drill with 3/16”, 1/2” and 1/8” masonry bit (C)
Power screwdriver with bull nose phillips bit (D)
Truss head spanner bit (E)
•
READ ALL INSTRUCTIONS BEFORE ASSEMBLY OF DIAPER CHANGING STATION.
•
Unpack carton and identify all parts.
INSTALLATION INSTRUCTIONS
1
•
This changer has six (6) recess mounting holes.
•
The diaper changing station is no stronger than the anchors or walls to which they are attached and, therefore,
contractor if any questions.
•
A stud MUST be located and used for at least one side of the diaper changing station.
WARNING
21-3/8”
542 mm
17-3/16”
(436 mm)
34-3/4” (883 mm)
(Door)
Parts Description
Quantity
Hardware for installation:
3” x 1/4” Wood Screws
4
3/4” Finishing Washers
4
3” x 1/4” Machine Screws
2
3/4” Flat Washers
4
Toggle Anchors
2
Door / Wall Plate
1
PARTS LIST
Toggle Anchors
3” x 1/4” Wood Screws
3/4” Finishing Washers
For Wood Studs:
3/4” Flat Washers
3” x 1/4” Machine Screws
3/4” Flat Washers
For Use With Toggle Anchors:
Door / wall plate to be
mounted on outside of
restroom door.
A
B
D
C
E
18"
(457 mm)
