STEP 6
Once you have completed the above, insert the cartridge you have been working on into the correct slot
in your printer alongside the Epson cartridges, close the lid and wait till the cartridge has been
recognized. Once it has been recognized, repeat the process of steps 1-4 with the remaining 8
cartridges.
STEP 7
Once you have completed steps 1-4 with all the Fotospeed Cartridges, close the lid down and your
status monitor should read “full” on all colours (see below).
STEP 8
Allow the cartridges to settle for at least 10 minutes, this will allow any air bubbles to disperse. Perform
one power clean to ensure a smooth transition from the Epson cartridges to the Fotospeed cartridges.
First press the right arrow. Choose MAINTENANCE
Then POWERCLEAN ...and finally press the middle button to EXECUTE
Summary of Contents for Tubeless InkFlow
Page 1: ......
