STEP 4
Arrange your empty Fotospeed refillable cartridges in the same order as your Epson brand cartridges
within your printer (see below). Swap one colour at a time (once filled and chipped). For example. take
out your Epson Yellow cartridge,
and replace with your filled
Fotospeed cartridge. Close the
lid and wait for the printer to
accept. Then repeat this with
each of the remaining cartridges.
N.B. It is very important to make sure that you change one cartridge at a time rather than all at once.
Preparing you Fotospeed Cartridges
STEP 1
You will notice that there are small orange bungs on all of the cartridges
(as below). These can be taken off from all of the cartridges (these are
only needed during shipping to prevent ingress of dust).
STEP 2
Remove the first Epson brand cartridge from your printer
and remove the chip as below using the screw driver
provided
Summary of Contents for Tubeless InkFlow
Page 1: ......
