11
12
LED STUDIO LIGHT
LED STUDIO LIGHT
Functions of the dimming knobs
In the menu, you can rotate to select the desired mode and tap to enter. Rotate the knob to select the desired
mode in the menu, tap once to set.
In other modes, parameters such as CCT, CMB, SPD, and Frq can be adjusted.
In HSI, CCT, RGBW mode, long press the knob to save the current settings.
SAT 0-100%
Intensity 0-100%
Selector
4.How to use the safety cable
(1)When hanging the product, always use the safety cable.
(2)The safety cable is fixed through the yoke and the external fixing frame.
5.Installing the AC power adapter*
(1) The V-lock holder is pre-installed on the AC power adapter.
(2) Install the power adapter with V-lock holder into the V-lock plate on the back of the light. It is successfully installed
when you hear the locking mechanism click.
(3) To remove the AC power adapter press the battery release button and push the adapter out of the V-lock plate.
*These instructions are for Prizmo 150; the AC power adapter is built-in on Prizmo 300
6.Connecting the power supply*
(1) Insert the 4-pin XLR plug of the AC power adapter into the 4-pin XLR socket on the lower left side of the control
panel; attach the power cord to the AC power adapter.
(2)Connect the AC power adapter to the external AC power. (AC100V-240V) You will now be able to power on your
light and see real-time data for color temperature, brightness and DMX addresses on the LCD display.
*These instructions are for Prizmo 150; the AC power adapter is built-in on Prizmo 300
7. Insert your V-lock batteries (sold separately) into the V-lock plate(s). You will now be able to power on your light
and view real-time data on the LCD display.
Note: FACTOR Prizmo 300 requires two batteries for proper opertaion
2.SAT Konb
3.Intensity Knob
Adjusts brightness from 0-100% in any mode.
In the menu of HSI mode, SAT can be adjusted from 0-100%.
In other modes, parameters such as SAT, CMB, Col, and Frq can be adjusted to view the operation application.
1.Selector Knob
