12.
DMX connection:
When using DMX function, connect the DMX cable to the DMX console (see the figure below). Set the
DMX address to desired address for control on the DMX console.
light
1
light
2
light
3
light
For example:
DMX address setting 1, then 1-1 is brightness control, 1-2 is color temperature control, 1-3 is red and
green deviation control, 1-4 is saturation control, 1-5 is monochrome red control, 1- 6 is monochrome
green control,1-7 is monochrome blue control.
1
-
2(
)
1-3(
)
1-4(
1-5
1-6
1-7
1-8
brightness
Color temperature
)
(SAT)
(red)
(green)
(blue)
Red and partial green
1-16(
)
2-1(
)
2-2(
2-3
2-4
2-5
）
2-6
brightness
Color temperature
)
(SAT)
(red)
(green
(blue)
Red and partial green
2-1(
)
2-2(
)
2-3(
2-4
2-5 red 2-6
）
2-7 blue
brightness
Color temperature
)
(SAT)
(
)
(green
(
)
Red and partial green
32-10(
)
32-11(
)
32-12(
32-13
32-14
32-15
32-16
brightness
Color temperature
)
(SAT)
(red)
(green)
(blue)
Red and partial green
8 Bit
10 Channels
1-1(
)1-2(
)1-3(
)1-4(
)
1-5(
)1-6(
)1-7(
)
brightness
Color temperature
SAT
red
green
blue
Red and partial green
1
2
16
17
506
507-512
LCD display address
DMX console channels
Pls refer to the chart below for details of the DMX address on on the LCD and the corresponding channels
on the DMX console.
6.Scenes
17
18
LED STUDIO LIGHT
LED STUDIO LIGHT
*Model One
(Corresponding CCT mode) CCT:2800-10000 K INT: 0-100%
*Model Two
(Corresponding CCT mode) HUE: 0-100% SAT: 0-100% INT: 0-100%
*Model THREE
(Corresponding RGBW mode) Red:0-100% Gre:0-100% Blu:0-100% Wht:0-100%
7.Fan
OFF
Low Speed /High Speed ------Fan running at low speed / high speed operation
Auto Speed ------------The fan runs according to the temperature inside the light
*
*
*
8.Language
English
Chinese
*
*
9.DMX Settings
DMX Address
001-512 (DMX address and settings)
Use the "Selector" button to enter and adjust the "Selector" knob to the desired address.
*
10.Remote control operation instructions
(1) Enter the remote control setting menu on the light. Set the desired wireless receiving address fromo 0 to 511.
(2) Enter the remote control setting menu on the remote control. Set the desired wireless receiving address
fromo 0 to 511.
(3) Make sure to match the wireless reveiving address to the same value on both the light and the remote control.
The remote control can control multiple lights at the same time.
(4) The wireless remote control has a working distance of approximately 65 feet (20 meters).
11.Factory Reset
(1) The light is restored to factory settings:
Press and hold the MENU button for more than 4 seconds in the main menu, the whole device is reset, and the
data is restored to the factory setting state.
(2) Remote control factory reset
Press and hold the MENU button for more than 4 seconds in the main menu, the remote control is reset, and the
data is restored to the factory setting state.
DMX512 Console
DMX connection for single light
DMX connection for multiple lights
DMX512 Console
13.DMX control:
First, the menu needs to be switched to the DMX control interface:
(Note: Seven channels are required for proper DMX control over all parameters)
