- 41 -
able to be straightened as much as possible.
9. First, tear off the protective film on the
decorative cover and fan cover, and put the
decorative cover into the fan cover. Then take
up the decorative cover and fan cover, hang
the decorative cover on the decorative cover
hook, lower the fan cover slowly, and push the
decorative cover and fan cover inward until the
fan cover is fastened to the corresponding cover
screws.
10. Install the smoke baffle plate.
①
Remove the "Installation Tips" on the smoke
baffle plate;
②
Take out one screw(#8×3/8"(M4×8mm)) in
the accessory bag (keep another screw for
backup);
③
Open the Smoke Baffle Plate to the
maximum angle;
④
Fix the left bracket with the screwdriver and
screw;
⑤
Install Collision Avoidance Elements on both
left and right corners of the Smoke Baffle Plate.
6. Remove the protective film of the stainless
steel surface and Grease Cup at both sides of
the range hood.
7. Lift and position the hood onto the mounting
screws. Make sure the hood is stable and
leveled by using a spirit level. Install the safety
buffer baffle above the hood(The safety block
is provided in the accessory bag in the packing
box of the decorative cover assembly.).
Caution:
Two installers are required to ensure
safe installation. Please install the safety stop
as required. The main function of the safety stop
is to prevent the range hood from being lifted up
accidentally, which will cause it to unhook and
potentially fall.
8. Secure the duct to the duct cover and seal the
connection with aluminum tape.
Make sure the hood is leveled. Install the Grease
Cup, and plug the appliance for a test run.
Caution:
Please run the machine and test if
the smoke pipe leaks air after it is sealed with
aluminum foil tape. The smoke pipe should be
