E-4
Features and functions
❶
[INPUT] jack (XLR-1/4” combo jack)
You
can connect an XLR male connector or
Φ6.3mm(1/4")TS
phone plug to this combo jack.
The XLR input accepts a balanced line signal,
while the phone input accepts an unbal-anced
line signal.
The pin assignment of the XLR connector is as
followings: pin 1: ground, pin 2: hot, pin 3: cold.
<Note>: You cannot use both the RCA and combo
[INPUT] jacks simultaneously.
When a plug is plugged into the RCA jack, the phone
jack is disabled.
When an RCA plug and an XLR connector are simul -
taneously inserted to the RCA and XLR jacks respec-
tively, both the input signals are mixed.
❷
[INPUT] jack (RCA jack)
You can connect an RCA plug to this unbalanced
line input jack.
<Note>: You cannot use both the RCA and combo
[INPUT] jacks simultaneously.
When a plug is plugged into the RCA jack, the phone
jack is disabled.
When an RCA plug and an XLR connector are simul -
taneously inserted to the RCA and XLR jacks respec-
tively, both the input signals are mixed.
❸
[CONTROL] knob
Used to adjust the audio volume level and tone control.
When the mode switch is at TONE position, pushing
the knob will switch between TREBLE and BASS.
See “Level and tone controls” on page E-5 for de-
tails.
❹
Level indicators
The LED indicator corresponding to the current
value of the controlling item is lit. When two ad-
jacent indicators are lit, the value that is in the
middle of the two is selected.
❺
Status indicators
When choosing TREBLE under TONE mode, the upper
indicator will light up. When choosing BASS under
TONE mode, the lower indicator will light up.
See “Level and tone controls” on page E-5 for de-
tails.
❻
Mode select switch
You can select the control mode: LEVEL or TONE.
When the switch is set to LEVEL, you can control the
volume level using the [CONTROL] knob. When the
switch is set to TONE, you can control the bass and
treble using the [CONTROL] knob. When the switch is
set to the center position (OFF), you cannot change
any value using the [CON-TROL] knob.
See “Level and tone controls” on page E-5 for de-
tails.
❼
[POWER] button
Turns on or off the power.
<Memo>: When you turn on the power, the auto
fade-in function is activated and the volume level
gradually increases to the level you previously saved.
❽
[AC IN] connector
Connects to the supplied power cord.
VOLUME
LEVEL
❷
❼
❽
❸
❹
❻
❺
❶
HS
Active Speaker
