E-11
Speaker section
Enclosure type: 2 way bass reflex
Units:
Tweeter: 1-inch soft dome tweeter
Woofer: 6.5-inch, Aramid fiber diaphragm
Frequency response: 48 Hz
～
20 kHz
Amplifier section
Rated output power
Low: 50 W
High: 28 W
Inputs
XLR-3-31 connector (balanced)
Maximum input level: +24 dBu
Input impedance: 20 kohms or more
1/4” phone jack (unbalanced)
Maximum input level: +10 dBV
Input impedance: 20 kohms or more
RCA jack (unbalanced)
Maximum input level: +10 dBV
Input impedance: 20 kohms or more
*The XLR-3-31 connector and the 1/4”
phone jack are combined in the combo
connector housing.
S/N ratio: 96 dB
Distortion (THD): 0.02 %
Crossover frequency: 2 kHz
Subsonic filter: 50 Hz
General
Dimensions: 335 (H) x 208 (W) x 253 (D) mm
Weight: 6.95 kg
Power requirement: US : 120 VAC, 60 Hz
EUR/UK : 230 VAC, 50/60 Hz
Power consumption: 65 W
(0.5 W or less in standby mode)
* Specifications and appearance are subject to
change without notice for product improve-
ment.
Specifications
Using the unit with a subwoofer
Subwoofer settings after adjusting
the phase of the high-pass filter
• Input an 85-Hz sine wave to both the unit and
the subwoofer. If you find the phase is re-
versed, flip the phase of the subwoofer 180
degrees.
• While monitoring music, adjust the level of the
subwoofer appropriately so that you can get a
flat sound pressure level at the low frequency
range around 85-Hz.
<Note>: For the subwoofer settings, see its instruc-
tion manual.
Disabling the high-pass filter
The unit that is set to be used with a subwoofer
can be returned to the condition to be used alone
(without a subwoofer) by disabling the high-pass
filter and enabling the tone control function for
BASS.
1) Set the mode select switch to the TONE posi-
tion.
The upper status indicator lights steadily.
2) Press the [CONTROL] knob.
Both the upper and lower status indicators are
unlit.
3) Press the [CONTROL] knob for more than three
seconds.
The lower status indicator lights steadily.
In this condition, the high-pass filter is disabled
while the tone control function for BASS is en-
abled.
0
10
20
30
40
50
60
70
80
90
100
110
120
100
1k
10k
[dB]
[Hz]
20
50
200
500
2k
5k
20k
BASS
MAX
CENTER
MIN
TREBLE
MAX
CENTER
MIN
Frequency Response
