background image

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER - SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

ATTENTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'

AU FOND.

The lightning flash with arrowhead symbol, within an equilateral 

triangle, is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

"WARNING"

SAFETY INSTRUCTIONS

"TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE."

Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions - The safety and operating instructions
should be retained for future reference.
Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions - All operating and use instructions should
be followed.
Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.
Carts and Stands - The appliance should be used only with a
cart or stand that is recommended by the manufacturer.

1.

2.

3.

4.

5.

6.

An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.

Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
Ventilation - The appliance should be situated so that its location
or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the ventilation
openings; or, placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through the ventilation
openings.

Heat - The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

7.

8.

9.

p-2

Power Sources - The appliance should be connected to a power
supply only of the type described in the operating instructions or
as marked on the appliance.
Grounding or Polarization - The precautions that should be taken
so that the grounding or polarization means of an appliance is
not defeated.

Power Cord Protection - Power supply cords should be routed

so that they are not likey to be walked on or pinched by items

placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they

exit from the appliance.
Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:

The power supply cord or the plug has been damaged; or

Objects have fallen, or liquid has been spilled into the appliance; or

The appliance has been exposed to rain; or

The appliance does not appear to operate normally or

exhibits a marked change in performance; or

 The appliance has been dropped, or the enclosure damaged.

A.

B.

C.

D.

E.

Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions.
All other servicing should be referred to qualified service
personnel.
The appliance should be situated away from drops of water or
spray of water.
Objects containing liquid such as vase must not be put on the
appliance.
The appliance is not completely isolated from the power supply
even if the power switch is at off position.
The apparatus shall be used in an open area.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

Summary of Contents for PM-2









Reviews: