Fostex DV-824 Owner'S Manual Download

Page: 109 / 162

109

DVD Multitrack Recorder DV824

After "Remake ALE" completes, press the [EXIT/NO] key.

The display shows the screen for updating the remade ALE file, on which "Are you
sure?" flashes.

Press the [ENTER/YES] key.

The remade ALE file is updated and the display returns to show the screen on which you
can select an editing item.

Press the [EXIT/NO] key repeatedly until you exit the EDIT EDL FILE menu.

Deleting an ALE file

You can delete an ALE file.
The following procedure example describes how to delete the "ALL-TAKE.ale" file.

While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed

by the [LIST PLAY/

EDIT EDL

] key.

The unit enters the "EDIT EDL FILE" menu and the display now shows the ALE screen for
selecting an ALE file.

On the example screen below, "ALL-TAKE.ale" is shown.

While "ALL-TAKE.ale" is highlighted, and press the [ENTER/YES] key.

After showing "Please wait!", the display shows the screen for editing an ALE file (on
which "Remake ALE" is highlighted).

Use the [MENU] key to select (highlight) "Delete file ALE", and press the [ENTER/YES]
key.

The display now shows the screen for deleting the selected ALE file, on which "Are you
sure?" flashes.

Press the [ENTER/YES] key to delete the file.

The ALE file is deleted and the display returns to show the screen for selecting an ALE
file.

Press the [EXIT/NO] key repeatedly until you exit the EDIT EDL FILE menu.

Summary of Contents for DV-824



































































































































































Search results

Summary of Contents for DV-824

Reviews:

Related manuals for DV-824

Brands by name

Popular brands

Fostex DV-824, Owner'S Manual

Search results

Summary of Contents for DV-824

Reviews:

Related manuals for DV-824

Brands by name

Popular brands