manualshive.com logo in svg

Fostex D-160, Owner'S Manual

The Fostex D-160 Supplement Owner's Manual is an essential companion for owners of this outstanding audio recorder. This comprehensive manual provides detailed instructions, troubleshooting tips, and valuable insights to maximize your recording experience. Download it for free from manualshive.com and unleash the full potential of your Fostex D-160.

Share
Download
background image

D-160 Owner's Manual (MMC/FEX List/Maintenance/Specifications)

178

< s i g n a t u r e   m a p >

< s i g n a t u r e   m a p >

< s i g n a t u r e   m a p >

< s i g n a t u r e   m a p >

< s i g n a t u r e   m a p >

bar2,  bar1,  bar0,  sign,  sigd
bar2: The 100th digit of the bar figure is expressed in BCD.
bar1: The 10th digit of the bar figure is expressed in BCD.
bar0: The 1 digit of the bar figure is expressed in BCD.
sign: Numerator of the signature to be set is expressed in BCD.
sigd: Denominator of the signature to be set is expressed in BCD.
When specified as sign=00 and sigd=00, signature data of that bar position will be
deleted. Also, bar2=bar1=bar0=sign=sigd=00 indicates "no corresponding data"
(such as when a figure specified by <event number> do not exist at receiving the
signature map request).

< t e m p o   s e t   m a p >

< t e m p o   s e t   m a p >

< t e m p o   s e t   m a p >

< t e m p o   s e t   m a p >

< t e m p o   s e t   m a p >

bar2,  bar1,  bar0,  beat, tmp2, tmp1, tmp0
bar2: The 100th digit of the bar figure is expressed in BCD.
bar1: The 10th digit of the bar figure is expressed in BCD.
bar0: The 1 digit of the bar figure is expressed in BCD.
beat:  The beat figure is expressed in BCD.
tmp2: Numerator of the tempo to be set is expressed in BCD.
tmp1: Denominator of the tempo to be set is expressed in BCD.
tmp0: The 1 digit of the tempo is expressed in BCD.
When specified as tmp2=tmp1=tmp0=00, tempo data of that bar and meter position
will be deleted. Also, bar2=bar1=bar0=sign=sigd=00 indicates "no corresponding
data" (such as when a figure specified by <event number> do not exist at receiving
the signature map request).

< e v e n t   n u m b e r >

< e v e n t   n u m b e r >

< e v e n t   n u m b e r >

< e v e n t   n u m b e r >

< e v e n t   n u m b e r >

When  one  data registered by <signature map> and <tempo set map> is declared as
one event, the number of events from head of the tune (the umpteenth event
counted from head of the tune) must be specified.  <event number="00"> is the first
event.

< m i d i   s y n c >

< m i d i   s y n c >

< m i d i   s y n c >

< m i d i   s y n c >

< m i d i   s y n c >

00: Off
01: CLK (MIDI CLOCK)
02: MTC
This corresponds to "Midi Sync Out?" of the SETUP menu.

< v a r i   d a t a >

< v a r i   d a t a >

< v a r i   d a t a >

< v a r i   d a t a >

< v a r i   d a t a >

Will be composed of two bytes (Q, P).
Q: 0qqqqqqq (binary) -> <vari data> = "qqqqqqqppppppp" A 14 bit data of X0.1
P: 0qqqqqqq (binary)

attached with a minus symbol.

Vari-pitch must be specified, at +0.1% when MSB (q)=0 (Example: 0000000000001),
and at -0.1% when MSB (q)=1 (Example: 1111111111111).

< f r a m e   r a t e >

< f r a m e   r a t e >

< f r a m e   r a t e >

< f r a m e   r a t e >

< f r a m e   r a t e >

00: 30nd
01: 29.97nd
02: 29.97df
03: 25
04: 24
05: 30df
Corresponds to selecting "Frame Rate?" of the SETUP menu.

< f s   r a t e >

< f s   r a t e >

< f s   r a t e >

< f s   r a t e >

< f s   r a t e >

00: 48kHz
01: 44.1kHz
Corresponds to selecting "Sample Rate?" of the SETUP menu.

< M T C   o f f s e t   m o d e >

< M T C   o f f s e t   m o d e >

< M T C   o f f s e t   m o d e >

< M T C   o f f s e t   m o d e >

< M T C   o f f s e t   m o d e >

00: ABS
01: Signature
Corresponds to selecting "MTC Offset Mode?" of the SETUP menu.

< t i m e   b a s e >

< t i m e   b a s e >

< t i m e   b a s e >

< t i m e   b a s e >

< t i m e   b a s e >

00: ABS
01: BAR BEAT
02: MTC

< l e v e l   d a t a >

< l e v e l   d a t a >

< l e v e l   d a t a >

< l e v e l   d a t a >

< l e v e l   d a t a >

t1, t2 ...... tn
n: Indicates the track number.
tn: Indicates absolute 8 bits of the Audio 16 bit data.

Summary of Contents for D-160





































































































































































































Reviews:

No comments

Related manuals for D-160

Calistair C300 Translation Of The Original Operating Instructions preview
C300
Brand: Calistair Pages: 44
ACCO Brands LOUDEN 200 Series Installation, Operation, Maintenance And Parts Manual preview
LOUDEN 200 Series
Brand: ACCO Brands Pages: 144
B&K 4416 Service Manual preview
4416
Brand: B&K Pages: 16
B&G H5000 Pilot Quick Reference Manual preview
H5000 Pilot
Brand: B&G Pages: 2
lancer BEV85 Quarterly Service Work Instruction preview
BEV85
Brand: lancer Pages: 3
lancer 2300 Series Installation Manual preview
2300 Series
Brand: lancer Pages: 12
R2 TST Instruction And Maintenance Manual preview
TST
Brand: R2 Pages: 26
Major tech MT550 Instruction Manual preview
MT550
Brand: Major tech Pages: 12
OAKWORKS QuickLock Instructions preview
QuickLock
Brand: OAKWORKS Pages: 2
Oakton pHTestr 30 Operating Instructions preview
pHTestr 30
Brand: Oakton Pages: 2
Oakton pH 5+ Operating Manual preview
pH 5+
Brand: Oakton Pages: 2
O2matic OMC PC-100 Quick Manual preview
OMC PC-100
Brand: O2matic Pages: 4
Raytec VARIO2 series Full Installation And Setup Manual preview
VARIO2 series
Brand: Raytec Pages: 60
Zodiac iAquaLink Quick Start Manual preview
iAquaLink
Brand: Zodiac Pages: 2
Zimmer enPuls User Manual preview
enPuls
Brand: Zimmer Pages: 46
SCHUNK PWG 130 Repair Instructions preview
PWG 130
Brand: SCHUNK Pages: 2
Teac BB-1000CD Release Notes preview
BB-1000CD
Brand: Teac Pages: 2
Honestech 3.0 Plus User Manual preview
3.0 Plus
Brand: Honestech Pages: 43

Brands by name

Popular brands

Load more brands