Installation instructions
The installation must be carried out by a specialized technician.
The installer must respect the local norms and standards in use.
Installation:
•
The worktop or support on which the hob is installed, along with all the materials
installed must be able to resist to temperatures of up to 100 °C.
•
The nearby walls and edges must also be able to resist to high temperatures.
•
The hobs are classified as “Y” class for heat protection. Ideally the hob should be
installed with plenty of side space on either side to allow air circulation.
In the case
of a rear and side wall make sure the opposite sides are clear from any wall,
unit or divider, mobile or immobile, with a height superior to the installation
surface of the cooker hob.
•
Ensure that there is a distance of 50 mm between the hob and the wall or edges.
•
Some materials which are often used to make worktops tend to expand when in
contact with water. Attention must be used for the installation of the gasket
supplied with the apparatus. The main function of these gasket is to prevent that
spilled liquids flow to the below cabinets. This gaskets guarantees the maximum
protection in combination with a smooth work tops.
•
The safety gap between the hob and the cooker hood placed above the apparatus
must respect the indications of the hood manufacturer. In case of absence of
instructions please maintain a minimum distance of 650 mm.
•
The connection cords should be not be tense or subject to solicitation or friction, for
example near a drawer.
CONNEXION OF THE DIFFERENT ELEMENTS
The installation of this appliance and the connections of the electrical network should be
carried out by a specialised technician in respect with the local norms and standards in
use.
Connection of cooking zones
Each connector of each cooking zone, is identified by a sticker with a number from
5 to 8 which corresponds to the following:
•
5: Heating zone 1100 W / Glass diameter 270mm (code 736127*)
•
7: Heating zone 2300 W / Glass diameter 300mm (code 736230*)
•
8: Heating zone 2300 W / Glass diameter 350mm (codice 736335*)
•
The control panel is identified with the letter “C” on the connector
On the junction box, you can find the female connectors with the corresponding units:
5-6-
7-8-C
.
