Foster N4LVFTNA, Instruction Manual, Page: 14 / 40

-14-
SERVICE - PARTS INFORMATION
When your cooktop requires service or replacement parts, contact your dealer or autho-
rized service agency. Please give the complete model and serial number of the cooktop
which is located on the cooktop model number plate.
Should you fail to locate the required replacement parts locally, please contact the
Nationwide service organization (for Canada and the U.S.A.):
Foster Service Center
7575 E Redield Rd #129, Scottsdale, AZ 85260
Telephone (888) 639-6001
E-mail: foster@adcoservice.com
Fax: (480)998-7877
For Massachusetts installations:
1. Shut-off valve must be a “T” handle gas cock
2. Flexible gas connector must not be longer than 36 inches
3. Not approved for installation in a bedroom or a bathroom unless unit is direct
vent
CHECK OF GAS PRESSURE AFTER THE INSTALLATION OF THE PRESSURE REGULATOR
The gas pressure in the cooktop’s manifold should be checked by a qualified installer,
after the pressure regulator has been installed and tested. To do this, a 1/8 NPT thread
is provided directly onto the pressure regulator. Connect a proper metering device to the
thread in order to measure the pressure. In order to check the pressure regulator, the
inlet pressure should be at least 1 in. water column more than the regulated manifold
pressure.