13
CONNEXION OF THE DIFFERENT ELEMENTS
The installation of this appliance and the connections of the electrical network should be carried
out by a specialised technician in respect with the local norms and standards in use.
Connection of cooking zones
Each connector of each cooking zone, is identified by a sticker with a number from
5 to 8 which corresponds to the following:
5: Heating zone 1100 W / Glass diameter 270mm (code 736127*)
7: Heating zone 2300 W / Glass diameter 300mm (code 736230*)
8: Heating zone 2300 W / Glass diameter 350mm (codice 736335*)
The control panel is identified with the letter “C” on the connector
On the junction box, you can find the female connectors with the corresponding units:
5-6-7-8-
C
.
The cords of the connector cables show the number for the correct connection to the induction
plates (see the below example 4 zones) Connect the heating zones with the corresponding
number of the junction box.
Connect the cable of the control panel to th
e “C” plug of the junction box.
Combinations of cooking zones
Touch control 2 zone
: (product code 7369020)
- 2 remaining zones (induction plate code 5, 7, 8)
Touch control 3 zone
: (product code 7369030)
- 1 zone 5 (mandatory) (induction plate code 736127*)
- 2 remaining zones (induction plate code 5, 7, 8)
Touch control 4 zone
: (codice modello 7369040)
- 2 zone 5 (mandatory) (induction plate code 736127*)
-
2 remaining zones (induction plate code 5, 7, 8)
Example:
Nota:
- It is strictly forbidden to lengthen or shorten the wires of the cooking zones.
- We do not take any responsibility in case the instructions contained in this
manual and/or safety norms are not followed properly.
