6
Installation of the appliance: after deciding the position and the type of installation,
insert the anti-vibration rubber caps in the holes of the brackets supplied.
The rubber caps must be put on the sides which are in contact with the wall.
Put the brackets on the remote fitted extraction motor by matching its holes with
those of the brackets. Fix with the screws supplied.
Put the group on the point previously chosen for the installation and mark the points
on the wall where the holes must be drilled. Insert the dowels supplied in the holes.
Put the remote fitted extraction motor on the wall by matching the holes of the bra-
ckets with the plastic dowels. Screw with the screws sup- plied.
Connection of the pipes: the appliance is endowed with an entrance and an outlet
to connect the pipes. Before connecting the exhaust pipes, check the direction of the
air showed on the external label. Connect the pipes and fix them with appropriate
metal clamps (exhaust pipes and metal clamps have to be supplied by the installer).
The pipe must be con- nected with the cooker-hood placed in the kitchen, and the
pipe must be directed outside the building.
Electrical connection of the hood: the appliance is equipped with a 7m electrical
cable with a six- pin connection at one end. Insert it into the hood’s connection (Ex-
ternal Motor version).
